diff options
1 files changed, 22 insertions, 22 deletions
| -rw-r--r-- | src/blog/fix-network-brother-printers/index.du | 44 |
diff --git a/src/blog/fix-network-brother-printers/index.du b/src/blog/fix-network-brother-printers/index.du index 045bb39..15a5126 100644 --- a/src/blog/fix-network-brother-printers/index.du +++ b/src/blog/fix-network-brother-printers/index.du @@ -1,28 +1,28 @@ -# Fix networked Brother printers not working in Linux +'def title Fix networked Brother printers not working in Linux +'def desc To fix a networked Brother printer under linux: check CUPS recongnises it on the network, check support, find drivers -'define expected-reading 4 min -'define created 28 June 2023 -'define edited 28 June 2023 -[$pagenav] +# {title} + +{pagenav 4 min;28 June 2023;28 June 2023} Before we start, make sure you have CUPS and avahi installed and running. ## Make sure CUPS recognises it -Go to [url https://localhost:631/printers/ localhost:631/printers] and make sure your printer is listed there. -If [=not=], go to [`Administration/Add Printer`] and select your printer. -If it's [=not=] listed even there, then you have some other network connectivity issue. +Go to {url localhost:631/printers;https://localhost:631/printers/} and make sure your printer is listed there. +If {b not}, go to {` Administration/Add Printer} and select your printer. +If it's {b not} listed even there, then you have some other network connectivity issue. -Otherwise [url #try-to-print-a-test-page try to print a test page]. +Otherwise {url try to print a test page;#try-to-print-a-test-page}. -### Check if it [=is=] recognised on the network. +### Check if it {b is} recognised on the network. Execute in the command line: ```bash avahi-browse --all -t -r -There will be a lot of output, but scroll down until you find something [*like*]: +There will be a lot of output, but scroll down until you find something {i like}: ``` = enp0s25 IPv4 Brother HL-L2350DW series _pdl-datastream._tcp local @@ -30,7 +30,7 @@ hostname = [BRW9C305B9EC83D.local] address = [192.168.0.110] The exact values aren't important, just make sure the part after IPv4 is the model of your printer. -[`address`] is the local printer address, ping it. +{` address} is the local printer address, ping it. In this example, the command would be: ```bash @@ -38,21 +38,21 @@ ping 192.168.0.110 .bulleted - If the ping is successful, you might also want to put that IP address in your browser. - With the example, you would open the link [`http://192.168.0.110`]. - Your printer [=may=] or [=may not=] support Web Based Management, which would allow you to edit it's setting from the browser. + With the example, you would open the link {` http://192.168.0.110}. + Your printer {b may} or {b may not} support Web Based Management, which would allow you to edit it's setting from the browser. If the page isn't available, don't worry about it. -If output is [=not=] something like [`64 bytes from ...`] (so, if it is [`Destination Host Unreachable`] or ping just hangs, without output), then it's an issue with your network or printer network configuration. +If output is {b not} something like {` 64 bytes from ...} (so, if it is {` Destination Host Unreachable} or ping just hangs, without output), then it's an issue with your network or printer network configuration. Make sure the printer is properly connected to the network.\n Otherwise, this shows that your computer has network access to the printer, and all problems are local. ### Check if your printer is supported by Linux. -Go to [url https://www.openprinting.org/printers www.openprinting.org/printers] and enter your model. +Go to {url www.openprinting.org/printers;https://www.openprinting.org/printers} and enter your model. If it isn't listed then it doesn't work for sure. -Alternatively, if it is and the rating [url https://wiki.linuxfoundation.org/openprinting/database/databaseintro#about_the_data isn't "Perfectly"], then read the whole page, in case networking is listed as nonfunctional. -If it [=is=] supported, then: +Alternatively, if it is and the rating {url isn't "Perfectly";https://wiki.linuxfoundation.org/openprinting/database/databaseintro#about_the_data}, then read the whole page, in case networking is listed as nonfunctional. +If it {b is} supported, then: ### Check if there are drivers available @@ -61,8 +61,8 @@ Run in the command line: ```bash lpinfo -v -If you only get entries like [`network WORD`], without anything which looks like a URL (URI), then you may not have a working driver. -Make sure you have installed any or tried all of the drivers listed in the printer's [url https://www.openprinting.org/printers www.openprinting.org] page. +If you only get entries like {` network WORD}, without anything which looks like a URL (URI), then you may not have a working driver. +Make sure you have installed any or tried all of the drivers listed in the printer's {url www.openprinting.org;https://www.openprinting.org/printers} page. ## Try to print a test page @@ -73,7 +73,7 @@ After a little while, the "State" should change from "pending" to "processing" ( ### Unable to locate printer "SOMETHING.local" If you also have the error "Unable to locate printer "SOMETHING.local"." (obviously SOMETHING is the exact value you get), then that means the printer is accessed via the domain name "SOMETHING.local". -[`.local`] domains require a special DNS server to be resolved, so inside [`/etc/nsswitch.conf`], on the line that starts with [`hosts`], add to it's end the value [`mdns_minimal`]. +{` .local} domains require a special DNS server to be resolved, so inside {` /etc/nsswitch.conf}, on the line that starts with {` hosts}, add to it's end the value {` mdns_minimal}. It should look something like: ``` @@ -82,4 +82,4 @@ hosts: files dns mdns_minimal After saving your changes, your printer should pretty quickly start printing the test page, no need to restart anything. .bulleted -- if your printer supports Web Based Management, then you should be able to go open the page [`http://SOMETHING.local`] in your browser and edit your printer settings from there. +- if your printer supports Web Based Management, then you should be able to go open the page {` http://SOMETHING.local} in your browser and edit your printer settings from there. |