diff options
feat(tutorials): Converted the rest of the tutorials into dunbar
2 files changed, 62 insertions, 54 deletions
| -rw-r--r-- | src/tutorials/install-drivers-for-epson-scanners/index.du | 62 | ||||
| -rw-r--r-- | src/tutorials/install-drivers-for-epson-scanners/index.md | 54 |
diff --git a/src/tutorials/install-drivers-for-epson-scanners/index.du b/src/tutorials/install-drivers-for-epson-scanners/index.du new file mode 100644 index 0000000..faba80e --- /dev/null +++ b/src/tutorials/install-drivers-for-epson-scanners/index.du @@ -0,0 +1,62 @@ +# Install drivers for Epson scanners + +'define expected-reading 3 min +'define created 26 April 2023 +'define edited 26 April 2023 +[$pagenav] + +'footnote gentoo-sane On Gentoo the package is `[sane-backends]`, as per the [url https://wiki.gentoo.org/wiki/SANE wiki]. + +Sometimes your Epson scanner might work out of the box, and sometimes it might not. +First, make sure you have [url http://sane-project.org/ SANE] installed on your machine[$gentoo-sane]. +Second look through [url http://www.sane-project.org/sane-mfgs.html#Z-EPSON the website], most scanners are supported out of the box, but about 15% of them either aren't supported or are untested. + +## Complete or Good + +'footnote openrc-sane For OpenRC: `[rc-service saned status]` + +If your scanner falls into the first category, labeled "Complete" or "Good", you probably have an issue with SANE. +Make sure the `[saned]` service is running without errors[$openrc-sane]: + +```bash +systemctl status saned.service + +and make sure the [url http://www.sane-project.org/man/sane-epson2.5.html sane-epson2] (or [url http://www.sane-project.org/man/sane-epson.5.html sane-epson]) back-end is enabled, you should have `[epson2]` (or `[epson]`) without a leading `[#]` inside `[/etc/sane.d/dll.conf]`. + +## epkowa plus non-free interpreter + +If it's unsupported and there is a note + +.quote supported by the epkowa backend plus non-free interpreter + +you can still make it work. +You'll have to get the =[non-free]= (free as in [url https://en.wikipedia.org/wiki/Free_software_movement publicly available source code], you don't have to pay for anything) Epson Scan 2 software. + +It can be downloaded from [url https://support.epson.net/linux/en/epsonscan2.php the support site] as a `[deb]` or `[rpm]` package. +If your system doesn't natively work with any of those (i.e. it isn't listed under "Distribution" and isn't some sort of derivative of those), you can still try the `[rpm]` package. + +:ordered +1. Install `[rpm]` with your package manager + +2. Download the 32 or 64 bit =[[ rpm ]]= package + +3. Extract it + + ```bash +tar -xf epsonscan2-bundle-SOMETHING.rpm.tar.gz + +4. Install the core application and non-free plugins with rpm + + ```bash +sudo rpm -Uvh --nodeps ./epsonscan2-bundle-SOMETHING.rpm/core/epsonscan2-SOMETHING.rpm ./epsonscan2-bundle-SOMETHING.rpm/plugins/epsonscan2-non-free-plugin-SOMETHING.rpm + + +Alternatively, you can install the `[deb]` package with `[dpkg]` or build and install it from [url https://download.ebz.epson.net/man/linux/epsonscan2_e.html#sec5-1-4 source] (source file is available at the bottom of the [url https://support.epson.net/linux/en/epsonscan2.php support site]). + +'footnote gentoo-epkowa Surprisingly enough, on my Gentoo installation everything works fine without the package. Either something else is helping me or [url http://www.catb.org/jargon/html/magic-story.html something is in the "more magic" position]... + +You will need[$gentoo-epkowa] to install `[iscan]`, which usually provides the aforementioned `[epkowa]` backend. +Also make sure you have `[epkowa]` inside `[/etc/sane.d/dll.conf]` without a leading `[#]`. + +Finally, only for the very first time after connecting your powered-on scanner, start "Epson Scan 2", select it and press "Next". +The drivers should automatically be installed and you can close the window and use your own scanning software of choice afterwards. diff --git a/src/tutorials/install-drivers-for-epson-scanners/index.md b/src/tutorials/install-drivers-for-epson-scanners/index.md deleted file mode 100644 index d7f42fd..0000000 --- a/src/tutorials/install-drivers-for-epson-scanners/index.md +++ /dev/null @@ -1,54 +0,0 @@ -# Install drivers for Epson scanners - -Sometimes your Epson scanner might work out of the box, and sometimes it might not. -First, make sure you have [SANE](http://sane-project.org/) installed on your machine[^gentoo-sane]. -Second look through [the website](http://www.sane-project.org/sane-mfgs.html#Z-EPSON), most scanners are supported out of the box, but about 15% of them either aren't supported or are untested. - -## Complete or Good - -If your scanner falls into the first category, labeled "Complete" or "Good", you probably have an issue with SANE. -Make sure the `saned` service is running without errors[^openrc-sane]: - -```bash -systemctl status saned.service -``` - -and make sure the [sane-epson2](http://www.sane-project.org/man/sane-epson2.5.html) (or [sane-epson](http://www.sane-project.org/man/sane-epson.5.html)) back-end is enabled, you should have `epson2` (or `epson`) without a leading `#` inside `/etc/sane.d/dll.conf`. - -## epkowa plus non-free interpreter - -If it's unsupported and there is a note - -> supported by the epkowa backend plus non-free interpreter - -you can still make it work. -You'll have to get the **non-free** (free as in [publicly available source code](https://en.wikipedia.org/wiki/Free_software_movement), you don't have to pay for anything) Epson Scan 2 software. - -It can be downloaded from [the support site](https://support.epson.net/linux/en/epsonscan2.php) as a `deb` or `rpm` package. -If your system doesn't natively work with any of those (i.e. it isn't listed under "Distribution" and isn't some sort of derivative of those), you can still try the `rpm` package. - -1. Install `rpm` with your package manager -2. Download the 32 or 64 bit **[ rpm ]** package -3. Extract it - - ```bash - tar -xf epsonscan2-bundle-SOMETHING.rpm.tar.gz - ``` - -4. Install the core application and non-free plugins with rpm - - ```bash - sudo rpm -Uvh --nodeps ./epsonscan2-bundle-SOMETHING.rpm/core/epsonscan2-SOMETHING.rpm ./epsonscan2-bundle-SOMETHING.rpm/plugins/epsonscan2-non-free-plugin-SOMETHING.rpm - ``` - -Alternatively, you can install the `deb` package with `dpkg` or build and install it from [source](https://download.ebz.epson.net/man/linux/epsonscan2_e.html#sec5-1-4) (source file is available at the bottom of the [support site](https://support.epson.net/linux/en/epsonscan2.php)). - -You will need[^gentoo-epkowa] to install `iscan`, which usually provides the aforementioned `epkowa` backend. -Also make sure you have `epkowa` inside `/etc/sane.d/dll.conf` without a leading `#`. - -Finally, only for the very first time after connecting your powered-on scanner, start "Epson Scan 2", select it and press "Next". -The drivers should automatically be installed and you can close the window and use your own scanning software of choice afterwards. - -[^gentoo-sane]: On Gentoo the package is `sane-backends`, as per the [wiki](https://wiki.gentoo.org/wiki/SANE). -[^openrc-sane]: For OpenRC: `rc-service saned status` -[^gentoo-epkowa]: Surprisingly enough, on my Gentoo installation everything works fine without the package. Either something else is helping me or [something is in the "more magic" position](http://www.catb.org/jargon/html/magic-story.html)... |