diff options
feat(tutorials): Converted half of the tutorials into dunbar
1 files changed, 0 insertions, 83 deletions
| -rw-r--r-- | src/tutorials/fix-network-brother-printers/index.md | 83 |
diff --git a/src/tutorials/fix-network-brother-printers/index.md b/src/tutorials/fix-network-brother-printers/index.md deleted file mode 100644 index 3265377..0000000 --- a/src/tutorials/fix-network-brother-printers/index.md +++ /dev/null @@ -1,83 +0,0 @@ -# Fix networked Brother printers not working in Linux - -Before we start, make sure you have CUPS and avahi installed and running. - -## Make sure CUPS recognises it - -Go to [localhost:631/printers](https://localhost:631/printers/) and make sure your printer is listed there. -If **not**, go to `Administration/Add Printer` and select your printer. -If it's **not** listed even there, then you have some other network connectivity issue. - -Otherwise [try to print a test page](#try-to-print-a-test-page). - -### Check if it **is** recognised on the network. - -Execute in the command line: - -```bash -avahi-browse --all -t -r -``` - -There will be a lot of output, but scroll down until you find something *like*: - -``` -= enp0s25 IPv4 Brother HL-L2350DW series _pdl-datastream._tcp local -hostname = [BRW9C305B9EC83D.local] -address = [192.168.0.110] -``` - -The exact values aren't important, just make sure the part after IPv4 is the model of your printer. -`address` is the local printer address, ping it. -In this example, the command would be: - -```bash -ping 192.168.0.110 -``` - -- If the ping is successful, you might also want to put that IP address in your browser. - With the example, you would open the link `http://192.168.0.110`. - Your printer **may** or **may not** support Web Based Management, which would allow you to edit it's setting from the browser. - If the page isn't available, don't worry about it. - -If output is **not** something like `64 bytes from ...` (so, if it is `Destination Host Unreachable` or ping just hangs, without output), then it's an issue with your network or printer network configuration. -Make sure the printer is properly connected to the network. - -Otherwise, this shows that your computer has network access to the printer, and all problems are local. - -### Check if your printer is supported by Linux. - -Go to [www.openprinting.org/printers](https://www.openprinting.org/printers) and enter your model. -If it isn't listed then it doesn't work for sure. -Alternatively, if it is and the rating [isn't "Perfectly"](https://wiki.linuxfoundation.org/openprinting/database/databaseintro#about_the_data), then read the whole page, in case networking is listed as nonfunctional. -If it **is** supported, then: - -### Check if there are drivers available - -Run in the command line: - -```bash -lpinfo -v -``` - -If you only get entries like `network WORD`, without anything which looks like a URL (URI), then you may not have a working driver. -Make sure you have installed any or tried all of the drivers listed in the printer's [www.openprinting.org](https://www.openprinting.org/printers) page. - -## Try to print a test page - -If it is recognised, click on it on the "Queue Name" column, then press "Maintenance" and select "Print test page". -Go back and you should find an entry under "Active jobs listed in processing order", at the bottom of the page. -After a little while, the "State" should change from "pending" to "processing" (make sure to refresh the page). - -### Unable to locate printer "SOMETHING.local" - -If you also have the error "Unable to locate printer "SOMETHING.local"." (obviously SOMETHING is the exact value you get), then that means the printer is accessed via the domain name "SOMETHING.local". -`.local` domains require a special DNS server to be resolved, so inside `/etc/nsswitch.conf`, on the line that starts with `hosts`, add to it's end the value `mdns_minimal`. -It should look something like: - -``` -hosts: files dns mdns_minimal -``` - -After saving your changes, your printer should pretty quickly start printing the test page, no need to restart anything. - -- if your printer supports Web Based Management, then you should be able to go open the page `http://SOMETHING.local` in your browser and edit your printer settings from there. |