diff options
feat(tutorials): Converted half of the tutorials into dunbar
1 files changed, 85 insertions, 0 deletions
| -rw-r--r-- | src/tutorials/fix-network-brother-printers/index.du | 85 |
diff --git a/src/tutorials/fix-network-brother-printers/index.du b/src/tutorials/fix-network-brother-printers/index.du new file mode 100644 index 0000000..c6ac699 --- /dev/null +++ b/src/tutorials/fix-network-brother-printers/index.du @@ -0,0 +1,85 @@ +# Fix networked Brother printers not working in Linux + +'define expected-reading 4 min +'define created 28 June 2023 +'define edited 28 June 2023 +[$pagenav] + +Before we start, make sure you have CUPS and avahi installed and running. + +## Make sure CUPS recognises it + +Go to [url https://localhost:631/printers/ localhost:631/printers] and make sure your printer is listed there. +If =[not]=, go to `[Administration/Add Printer]` and select your printer. +If it's =[not]= listed even there, then you have some other network connectivity issue. + +Otherwise [url #try-to-print-a-test-page try to print a test page]. + +### Check if it =[is]= recognised on the network. + +Execute in the command line: + +```bash +avahi-browse --all -t -r + +There will be a lot of output, but scroll down until you find something *[like]*: + +``` += enp0s25 IPv4 Brother HL-L2350DW series _pdl-datastream._tcp local +hostname = [BRW9C305B9EC83D.local] +address = [192.168.0.110] + +The exact values aren't important, just make sure the part after IPv4 is the model of your printer. +`[address]` is the local printer address, ping it. +In this example, the command would be: + +```bash +ping 192.168.0.110 + +.bulleted +- If the ping is successful, you might also want to put that IP address in your browser. + With the example, you would open the link `[http://192.168.0.110]`. + Your printer =[may]= or =[may not]= support Web Based Management, which would allow you to edit it's setting from the browser. + If the page isn't available, don't worry about it. + +If output is =[not]= something like `[64 bytes from ...]` (so, if it is `[Destination Host Unreachable]` or ping just hangs, without output), then it's an issue with your network or printer network configuration. +Make sure the printer is properly connected to the network.\n + +Otherwise, this shows that your computer has network access to the printer, and all problems are local. + +### Check if your printer is supported by Linux. + +Go to [url https://www.openprinting.org/printers www.openprinting.org/printers] and enter your model. +If it isn't listed then it doesn't work for sure. +Alternatively, if it is and the rating [url https://wiki.linuxfoundation.org/openprinting/database/databaseintro#about_the_data isn't "Perfectly"], then read the whole page, in case networking is listed as nonfunctional. +If it =[is]= supported, then: + +### Check if there are drivers available + +Run in the command line: + +```bash +lpinfo -v + +If you only get entries like `[network WORD]`, without anything which looks like a URL (URI), then you may not have a working driver. +Make sure you have installed any or tried all of the drivers listed in the printer's [url https://www.openprinting.org/printers www.openprinting.org] page. + +## Try to print a test page + +If it is recognised, click on it on the "Queue Name" column, then press "Maintenance" and select "Print test page". +Go back and you should find an entry under "Active jobs listed in processing order", at the bottom of the page. +After a little while, the "State" should change from "pending" to "processing" (make sure to refresh the page). + +### Unable to locate printer "SOMETHING.local" + +If you also have the error "Unable to locate printer "SOMETHING.local"." (obviously SOMETHING is the exact value you get), then that means the printer is accessed via the domain name "SOMETHING.local". +`[.local]` domains require a special DNS server to be resolved, so inside `[/etc/nsswitch.conf]`, on the line that starts with `[hosts]`, add to it's end the value `[mdns_minimal]`. +It should look something like: + +``` +hosts: files dns mdns_minimal + +After saving your changes, your printer should pretty quickly start printing the test page, no need to restart anything. + +.bulleted +- if your printer supports Web Based Management, then you should be able to go open the page `[http://SOMETHING.local]` in your browser and edit your printer settings from there. |