[awk-edits] Removed old ftag scripts

3 files changed, 0 insertions, 360 deletions

diff --git a/awk-edits/File-type.awk b/awk-edits/File-type.awk
deleted file mode 100644
index 32e22b9..0000000
--- a/awk-edits/File-type.awk
+++ /dev/null
@@ -1,97 +0,0 @@
-# .*(misc|preserved).*html
-#
-# == About ==
-#
-# Each file list is a "details" element, that contains a table, each row being a different file
-# or alternatively, just the table on it's own.
-# 
-# -- Result HTML --
-#
-# <details>
-#   <summary>Folder Info</summary>
-#   <table>
-#     <tr>File Data</tr>
-#   </table>
-# </details>
-# or
-# <table>
-#   <tr>File Data</tr>
-# </table>
-
-#
-# == ftags ==
-#
-# &&folder     The text right afterwards is the title of the folder. All files
-#              are hidden inside the collapsed details tag (click to show).
-#              The file table is indented. You cannot have a folder inside a folder.
-#              It can be omitted, and the files table will be shown as-is.
-#
-# &&file       Everything that follows this tag is the data for a file. You should
-#              use &&fd to specify columns of information! Depending on the context,
-#              it might be flrepllaced with the start of a table, closing the summary
-#              and starting table, or closing and opening a table row.
-#
-# &&/files     This tag must exist at the bottom of a file list, no matter if it was
-#              started with or without a &&folder.
-#
-# &&fd         Defines a column of information for a file (row). Practically, it is
-#              flrepllaced with <td>, and </td> is added to the end of the line.
-#              If you don't use it, make sure to have the leading and trailing td tags!
-#
-# &&ft-TYPE    Depending on TYPE, it inserts an image tag that contains the file "icon"
-#              for the corresponding type.
-#              Available values for TYPE: photo, text, zip, movie, markdown
-#
-# -- Placement/Flow --
-#
-# All ftags, except &&fd, can be placed on their own line (empty line above and below)
-# or before/after another ftag.
-# Folder title must be inside the same paragraph as the ftag itself. This means that,
-# after
-# every &&folder ftag, the text can continue directly next to it and/or on new lines,
-# without there being any empty lines (you can add those with <br> or two spaces at
-# line end).
-#
-# -- Example Usage --
-#
-# (I like to indent a bit &&fd ftags, for readability's sake, but you don't have to)
-#
-# &&file
-#   &&ft-text
-#   &&fd Notes
-#   &&fd 10 KB
-# &&/files
-#
-# &&folder Math
-# &&file
-#   &&ft-text
-#   &&fd Homework 1
-# &&file
-#   &&ft-text
-#   &&fd Homework 2
-# &&/files
-#
-# &&folder Art Project<br>
-# Status: 70% complete<br>
-# Note: Reserach Van Gogh paintings
-#
-# &&file
-#   &&fd Painting 1
-#   &&fd 100% Complete
-#
-# &&file
-#   &&fd Painting 2
-#   &&fd 40% Complete
-#
-# &&/files
-
-function flSub(name, repl) {
-	sub("&#38;&#38;" name, "<span class=\"file-type-icon\">" repl "</span>")
-}
-
-/&#38;&#38;ft-photo/    { flSub("ft-photo",    "\\&#xeb0a;") }
-/&#38;&#38;ft-text/     { flSub("ft-text",     "\\&#xeaa2;") }
-/&#38;&#38;ft-zip/      { flSub("ft-zip",      "\\&#xed4e;") }
-/&#38;&#38;ft-movie/    { flSub("ft-movie",    "\\&#xeafa;") }
-/&#38;&#38;ft-markdown/ { flSub("ft-markdown", "\\&#xec41;") }
-/&#38;&#38;ft-browser/  { flSub("ft-browser",  "\\&#xebb7;") }
diff --git a/awk-edits/Icons.awk b/awk-edits/Icons.awk
deleted file mode 100644
index ae780bd..0000000
--- a/awk-edits/Icons.awk
+++ /dev/null
@@ -1,30 +0,0 @@
-# .*html
-#
-# == About ==
-#
-# A collection of ftags that generate an image HTML tag, containing the specified
-# thing. This is done, because these tags need to have specific classes, which is
-# supported in Markdown, but is less flexible and more tedious.
-#
-# -- Placement/Flow --
-#
-# They can reside absolutely anywhere in text.
-
-function flagSub(name, alt) {
-	gsub("&#38;&#38;" name,
-	     "<img src=\"/img/" name ".svg\" class=\"flag unzoomable svg\" alt=\"" name "\" height=18>")
-}
-
-/&#38;&#38;gb/ { flagSub("gb", "ENG") }
-/&#38;&#38;bg/ { flagSub("bg", "BGN") }
-
-function articleIconSub(name, filename) {
-	sub("p>&#38;&#38;" name,
-	    "p class=\"special-par " name "-par\">\\&#38;\\&#38;" name)
-	gsub("&#38;&#38;" name,
-	     "<img src=\"/img/" filename "\" class=\"special-par-icon borderless unzoomable\" alt=\"" name "\">")
-}
-
-/&#38;&#38;question/  { articleIconSub("question",  "dialog-question.png") }
-/&#38;&#38;warn/      { articleIconSub("warn",      "dialog-warning.png") }
-/&#38;&#38;important/ { articleIconSub("important", "dialog-important.png") }
diff --git a/awk-edits/Presentation.awk b/awk-edits/Presentation.awk
deleted file mode 100644
index 4d3826a..0000000
--- a/awk-edits/Presentation.awk
+++ /dev/null
@@ -1,233 +0,0 @@
-# .*(slides|teaching)/.*html
-#
-# == About ==
-#
-# This is my way of making slide-based presentations. In short, it just groups
-# Markdown formatting into rectangles and adds options for layout formatting.
-# Inside each slide, normal element flow is respected.
-# Each slide is the size of a landscape-oriented A4 sheet of paper. Light/dark
-# mode settings are respected (of course).
-# Currently, this is active only in pages under the "slides" folder.
-
-#
-# == ftags ==
-#
-# &&presentation    Must appear before any other presentation ftags.
-#                   It "loads" everything necessary for a presentation, that being
-#                   the navigation bar and logic script (which also inserts the
-#                   custom stylesheet).
-#                   Can be only one per page. Also refer to -- Surroundings --
-# 
-# &&slide           Everything following this tag is part of a slide. Each slide is
-#                   presented in the order it appears in.
-# &&/slide          Ends (the last started) slide.
-#
-# &&clide           Same as &&slide, but everything following is centered
-#                   vertically. Uses flexbox.
-# &&/slide          Ends (the last started) clide. Not compatible with &&/slide!
-#
-# &&table           Starts a table, where everything following it is formatted as a
-#                   table cell in a row.
-# &&ftable          Same as &&table, but all colums have the same width.
-# &&tarow           Ends the last started row and begins a new row.
-#                   Effectively everything following it is on a new row.
-# &&/table          Ends (the last started) (table row and) table or ftable.
-#
-# &&linebN          Adds a line break (vertical spacing) of N (text) lines.
-#                   Spacing is equivalent to N em.
-#                   Available values for N: 1, 2, 3, 4, 5, 6, 7, 8, 9
-# 
-# &&fontSIZE        Changes font size to SIZE, in pixels. Default size is 30px.
-#                   Available values for SIZE: 18, 20, 22, 25, 27, 35
-# &&/font           Text between &&fontSIZE and &&/font is sized accordingly
-#
-# &&centered        Center horizontally (only) text.
-# &&/centered       Text between &&centered and &&/centered is aligned.
-#
-# &&fright          Aligns following elements and text to the right.
-# &&/fright         Text between &&fright and &&/fright is aligned to the right
-#
-# &&cont            Basic container with no properties. Useful if you need to group
-#                   multiple elements into one table cell.
-# &&/cont           Ends (the last started) &&cont
-#
-# &&widthPER        Sets the element's width to be PER percentage. Primarily made
-#                   for images, since perfect scaling is impossible.
-#                   Available values for PER: 5, 10, 15, 20, ..., 90, 95
-# &&/width          Text between &&widthPER and &&/width is sized accordingly
-#
-# -- Surroundings --
-#
-# As stated, there can only be one presentation per page.
-# Everything that is around a presentation and it's slides is normally hidden
-# during presenting mode and while printing.
-#
-# -- Placement/Flow --
-#
-# All ftags can be placed on their own line, or in a line with other ftags.
-# The only requirement is that such a line must start with an ftag, ftags in the
-# middle of text aren't recognized.
-#
-# -- Regarding flex --
-#
-# The older versions of the script, prior to commit
-# 687ff3652e5695183ba1691e7d4b94470f8407b3
-# used extensively flexbox for element alignment. This was done with the hope that
-# spacing out elements evenly and centering them would be very easy, which turned
-# out to be false.
-#
-# Now, the only thing that uses flexbox is &&clide, and it only allows to center
-# everything in the slide vertically.
-# Vertical centerings for portions of elements can be done with &&linebN, which,
-# though imperfect, does the job very well and should suffice.
-# Evenly spacing out elements next to each other can be done with &&table and
-# &&ftable.
-#
-# -- Example Usage --
-#
-# Refer to src/talks/demo/index.md
-
-BEGIN {
-	# names is name of ftag, meaning if `names[i] = "examp"` the ftag will be &&examp
-	# ended specifies how the HTML tag is ended
-	#     `ended[i] = 0` means no closing ftag (so no &&/examp)
-	#     `ended[i] = 1` means &&/examp exists
-	#     `ended[i] = 2` means self-closing, so no &&/examp, but &&examp includes the closing tag
-	#
-	# &&examp is usually replaced by `<div class="examp">`
-	# &&/examp is usually replaced by `</div>`
-	# in case ended[i] = 2, &&examp is replaced by `<div class="examp"></div>`
-
-	# Main elements and exceptions to the normal replace format
-	names[ 1] = "presentation"
-	ended[ 1] = 0
-	names[ 2] = "slide"
-	ended[ 2] = 1
-	names[ 3] = "clide"
-	ended[ 3] = 1
-	names[ 4] = "table"
-	ended[ 4] = 1
-	names[ 5] = "ftable"
-	ended[ 5] = 0
-	names[ 6] = "tarow"
-	ended[ 6] = 0
-	names[ 7] = "&#47;font" # all font ftags can be closed with a &&/font
-	ended[ 7] = 0
-
-	# Line breaks
-	names[ 8] = "lineb1"
-	ended[ 8] = 2
-	names[ 9] = "lineb2"
-	ended[ 9] = 2
-	names[10] = "lineb3"
-	ended[10] = 2
-	names[11] = "lineb4"
-	ended[11] = 2
-	names[12] = "lineb5"
-	ended[12] = 2
-	names[13] = "lineb6"
-	ended[13] = 2
-	names[14] = "lineb7"
-	ended[14] = 2
-	names[15] = "lineb8"
-	ended[15] = 2
-	names[16] = "lineb9"
-	ended[16] = 2
-
-	# Font sizes
-	names[17] = "font18"
-	ended[17] = 0
-	names[18] = "font20"
-	ended[18] = 0
-	names[19] = "font22"
-	ended[19] = 0
-	names[20] = "font25"
-	ended[20] = 0
-	names[21] = "font27"
-	ended[21] = 0
-	names[22] = "font35"
-	ended[22] = 0
-
-	# Everything else
-	names[23] = "centered"
-	ended[23] = 1
-	names[24] = "fright"
-	ended[24] = 1
-	names[25] = "cont"
-	ended[25] = 1
-	names[26] = "&#47;width"
-	ended[26] = 0
-
-	nameslength = 26 # POSIX compatibility: length(names) isn't valid
-
-	for (i = 95; i >= 5; i -= 5) {
-		nameslength++
-		names[nameslength] = "width" i
-		ended[nameslength] = 0
-	}
-
-	pres = ORS \
-"<nav id=\"presentCont\">" ORS \
-"	<span id=\"prevSlideBtn\" class=\"btn nodisplay\">\\&#x2190;</span>" ORS \
-"	<a id=\"slideIndex\" class=\"nodisplay\" href=\"#slide-0\">0</a>" ORS \
-"	<span id=\"nextSlideBtn\" class=\"btn nodisplay\">\\&#x2192;</span>" ORS \
-"	<span id=\"articleBtn\" class=\"btn setting-btn\">Article view \\&#x2632;</span>" ORS \
-"	<span id=\"presentBtn\" class=\"btn setting-btn\">Present \\&#x239A;</span>" ORS \
-"	<span id=\"printBtn\" class=\"btn setting-btn\">Print \\&#x2399;</span>" ORS \
-"		</nav><br><br>" ORS \
-"		<script type=\"text/javascript\" src=\"/scripts/presentation.js\" crossorigin=\"anonymous\"></script>"
-
-	for (i = 1; i <= nameslength; i++) {
-		pat[i] = "&#38;&#38;" names[i]
-		rep[i] = "<div class=\"" names[i] "\">"
-
-		if (ended[i] == 1) {
-			cpat[i] = "&#38;&#38;&#47;" names[i]
-			crep[i] = "</div>"
-		}
-		else if (ended[i] == 2) {
-			rep[i] = rep[i] "</div>"
-		}
-	}
-
-	rep[ 1] = pres
-	rep[ 3] = "<div class=\"slide clide\"><div></div><div>" # flex-col + flex:1 + <div>
-	crep[3] = "</div><div></div></div>"                     # </div>   + flex:1 + /flex-col
-	rep[ 4] = "<div class=\"layout-table\"><div class=\"layout-row\">" # <table><tr>  (layout-row > * is td)
-	crep[4] = "</div></div>"                                           # </tr><table>
-	rep[ 5] = "<div class=\"layout-table fixed-layout\"><div class=\"layout-row\">" # <table><tr>  (layout-row > * is td)
-	rep[ 6] = "</div><div class=\"layout-row\">" # </tr><tr>
-	rep[ 7] = "</div>" # &&/font
-	rep[26] = "</div>" # &&/width
-
-	presInsideCode = 0
-	slideIndex = 0
-}
-
-function presentationSubstitute(ind) {
-	gsub(/(<p>|<\/p>)/, "")
-	if ((ind == 2 || ind == 3) && index($0, pat[ind]) != 0) { # &&slide or &&clide
-		gsub(pat[ind], "<div id=\"slide-" slideIndex "\"" substr(rep[ind], 5))
-		slideIndex++
-	}
-	else {
-		gsub(pat[ind], rep[ind])
-	}
-	if (ended[ind] == 1)
-		gsub(cpat[ind], crep[ind])
-}
-
-/<code>/ {
-	presInsideCode = 1
-}
-
-/<\/code>/ {
-	presInsideCode = 0
-}
-
-presInsideCode == 0 && /^[ \t]*(<p>)?&#38;&#38;/ {
-	for (i = 1; i <= nameslength; i++) {
-		if (index($0, names[i]) != 0)
-			presentationSubstitute(i)
-	}
-}